Specifications︰ Unit construction : steel shell, end caps and steel baffles.
O.D.S. connections are steel on type 2200 and 2300, and wrought copper on type 2400.
All sweat connections are for actual O.D. tubing.
Maximum working pressure 450 PSIG type 2400. type 2200 and 2300 500 PSIG.
CM-2300,2400 can be installed horizontally or vertically.

CM-2200 series :

CM-2203 : Flow capacity 2 tons, 2 inch O.D. , Overall length 7.36¨ , Fitting size 3/8¨ O.D.S.

CM-2204 : Flow capacity 3 tons, 2 inch O.D. , Overall length 7.36¨ , Fitting size 1/2¨ O.D.S.

CM-2205 : Flow capacity 5 tons, 2 inch O.D. , Overall length 7.36¨ , Fitting size 5/8¨ O.D.S.

CM-2300 series :

CM-2305 : Flow capacity 5 tons, 3 inch O.D. , Overall length 7.48¨ , Fitting size 5/8¨ O.D.S.

CM-2307 : Flow capacity 7.5-10 tons, 3 inch O.D. , Overall length 11.42¨ , Fitting size 7/8¨ O.D.S.

CM-2311 : Flow capacity 10-15 tons, 3 inch O.D. , Overall length 13.38¨ , Fitting size 1-1/8¨ O.D.S.

CM-2400 series :
CM-2411 : Flow capacity 10-15 tons, 4 inch O.D. , Overall length 13.19¨ , Fitting size 1-1/8¨ O.D.S.

CM-2413 : Flow capacity 10-25 tons, 4 inch O.D. , Overall length 14.76¨ , Fitting size 1-3/8¨ O.D.S.

CM-2415 : Flow capacity 25-50 tons, 4 inch O.D. , Overall length 19.09¨ , Fitting size 1-5/8¨ O.D.S.

Mufflers are designed to eliminate pulsation in compressor discharge line running to remote condensers.
Mufflers have internal baffles designed for minimum pressure drop. These baffles change the velocity of the discharge gases passing through the muffler. This results in a dampening effect on high frequency sound waves in the gases on high speed compressors. This also irons out the pulsating waves in low speed compressors.
Mufflers are sized to the discharge line of the compressor.